High solids, amine-cured epoxy formulated
from the very finest ingredients. Its high build quality allows
for a one coat application in many service conditions, over
properly prepared surfaces. Excellent chemical and corrosion
resistance in most water applications, corrosive fume service
and where high impact and abrasion resistance is required.
Steel vessels, pipes, pumps, valves, blowers, and structural
weldments in many water, chemical, petroleum and marine environments.
OTHER FEATURES: KEYSITE 740 is a high solid VOC compliant epoxy, exceeding the most stringent air quality regulations. KEYSITE 740 is non flammable, therefore, it can be applied with ease in areas where another epoxy system might create a fire concern.
KEYSITE 740 is easy to apply and if damaged
can be readily repaired in the field.
KEYSITE 740 has the highest impact resistance
and bond strength in new applications and when applied over
properly prepared existing Keysite 740 linings.
KEYSITE 740 has excellent resistance to
the following: Water (tap, fresh, salt, brackish, distilled,
deionized, boiler feed to 180°F.), alcohol, alkalies,
gasoline, diesel fuel, sour crude, mineral solvents, toluene,
xylene, kerosene, and nonedible vegetable oils. |
