Tapping Valves |
| |
|
Threaded Full Port Ball Valves |
| The Anvil Figure 171N Brass Ball Valves have a rugged, dependable design, meeting rigid specification for world wide use. Every valve is individually tested in an open and closed position at 80 psi. The two piece 171N full port design are available in sizes ¹⁄₄ - 4”. A wing handled version of the 171N is also available as Figure 171N-T in sizes ³⁄₈ - 1”.
Anvil’s Brass Ball Valves are available in, full port threaded end.
150 psi Steam
600 psi WOG
UL/FM Approved
Full and Standard Port
¹⁄₄ - 4'' Sizes
¹⁄₂ PSIG (171N & 171N-T only)
CRN 0C5126.5C
|
| |
|
|
|
| Flanged Ball Valves |
American Valve's Model 4000 Cast Iron Flanged-End Ball Valve revolutionized the PVF industry. With the addition of Model 4000D in Ductile Iron and Model 4001 in 316 Stainless Steel, we are raising the standards for ball valve technology.
The 4000 and 3700 Series feature a Teflon-fused ball that is more durable, less succeptible to accumulating buildup and longer lasting than an ordinary unprotected ball.
This adds to a long list of advantages over other types of valves.
Teflon® fused solid ball and Teflon® seat design.
Quarter turn provides instant shutoff.
Easy to open and close.
Easy to automate. Built-in mounting pads require no special brackets.
Much more resistant to wear...especially in corrosive applications.
Handle position shows immediately whether it is open or closed.
Throttling is permitted... open and shut are not the only working positions.
Can be locked in either open of closed position.
Easy to manipulate quarter-turn handle allows for smaller, lighter, less expensive actuator! |
| |
|
|
Resilient Seated Gate Valves |
Sizes 2” - 48”
J&S Valves Improve the Industry Standard for AWWA Gate Valves by Manufacturing a Heavy Thick Wall All Ductile Iron Gate Valve with a Large Diameter Stainless Steel Stem, Stainless Steel Hardware, and a Superior Interior and Exterior Fusion Bonded Epoxy Coating. The J&S Robust Design Resists Breaking Stems and Valve Damage. J&S valves are International Flow's first choice in service valves.
Sizes 2” - 48”
Sizes 2”- 72”
|
| |
|
|
|
| Iron Gate Valves |
| Iron gate, globe & check valves are available in sizes 2" - 24" and in 125 & 250 lb. classes. Materials of construction include IBBM, all iron and 3% nickel. By-passes and outside lever & weight options are also available upon request.
125 lb. SWP-200 lb. WOG†
OS and Y Solid Wedge Disc
Bolted Bonnet
Gland Packed
Flanged Ends |
| |
|
|
|
| Flanged Steel Gate Valve |
| Cast stainless steel body and investment cast yoke. In fabricated valves, leakage of corrosive medium due to neglected maintenance on the packing, or line pressure surges causes corrosion and failure of most carbon steel or cast iron components. An all stainless steel valve offers better corrosion resistance than cast iron lined valves. The total cost of ownership becomes more attractive than the initial savings. |
| |
|
|
|
| Flanged Butterfly Tapping Cartridge Valves |
| The Dylan Cartridge Valve® is a patented revolutionary process for hottaping existing systems then adding any valve desired. This breakthrough technology enables the tapping of butterfly valves and also enables tapping without leaving a permanent valve. Likewise, the Dylan Cartridge Valve® if installed in a new system enables a reliable future isolation point when necessary.
Sizes range from 12 " - 72"
Pressures through 600psi.
Available Now in:
Fusion epoxy coated carbon steel
or 316 stainless steel
For water, sewage, & chemicals.
Repair without SHUTTING DOWN.
Fast delivery and installation.
Turnkey services available.
|
| |
