499 Linestop Saddles, Clamps, Sleeves & Grips for
PVC, Steel and Copper Pipe

Comes with Brass Completion Plug and Standard Cap

Saddles are design for QT style linestop machines

Now Available 3/4 x 3/4, 1 x3 /4 and 1-1/4 x 1-1/4 For Copper Tubing and Steel/PVC pipe

1. Panel: Type 304 (18-8) Stainless steel per ASTM A240
2. Gasket: 1/4" thick (EPDM) Chek-O-Seal with multi o-ring sealing ribs from 100% new rubber to ensure performance under varying pressures with superior storage characteristics. Suitable for oils, acids, alkalines, most Hydrocarbon Fluids (aliphatic), portable water, and many other chemicals within temperature range of –40^o F - +180^o F.
3. Lugs: Type 304 (18-8) Stainless steel per ASTM A240
4. Bolts and Nuts: Type 304 (18-8) Stainless steel per ASTM A193 & A194. Note: Hex nuts are furnished with fusion bonded coating to prevent seizing and galling.
5. Outlet: Type Stainless Steel 304/304L seamless, machined
6. All outlets are "Male Threaded NPT" outside
7. Inlets threaded
8. Brass Plug: half-hard, SAE, CA-360 per ASTM B-16
9. Cap: Standard MI type
10. Working Pressure: Maximum 150 PSI.