STOPAQ® AMCORR EZ WRAP is a unique approach to solving waterproofing problems in the long run. It is usable for encapsulation of asbestos or other, waterproofing, and for sealing the base at storage tanks. It is a sealant in a ROLL form based upon synthetic a-polar polymers. The roll makes it easy to apply with little preparation. It is the latest technology in waterproofing. The product remains flexible, and allows movements due to weather or flexing of the floor plate. STOPAQ® AMCORR EZ WRAP has been used and approved in different countries throughout the world. It is proudly manufactured in the USA.

Choose below for:
| Technical Data Sheet | Safety Data Sheet |

STOPAQ® Flange protector is a coating based upon synthetic a-polar polymers. The paste form makes it easy to apply with little preparation. The visco-elastic formulation allows the material to flow into gaps and voids, creating an excellent seal against corrosion.

Choose below for:
| Technical Data Sheet | Safety Data Sheet | Technical Manual |

STOPAQ FN3000 is a versatile and economical product intended for a wide range of structural applications both above and below ground where water infiltration is a problem. STOPAQ FN3000 provides for a quick and economical method of installation with excellent caulking properties. This single grade material may be caulked, knifed or troweled during times when only a clean dry surface is present. It adheres to most structural surfaces without priming. STOPAQ FN3000 is non-toxic and environmentally friendly. There is no cure or set up time required. The material remains permanently pliable, is easy to remove and is re-usable in many applications. STOPAQ FN3000 is storage stable (dry/cool) with an unlimited shelf life.

Choose below for:
| Technical Data Sheet | Safety Data Sheet |

The most suitable method for the filling of pipeline casings is the STOPAQ® Corrosion Preventative System for Casings. In relation to the effectiveness of this system in which STOPAQ® Casing Filler is injected as a casing filler material, we can say it is far superior to any other coating system yet in the market. This system combines the excellent corrosion preventative properties and the visco-elastic behavior of STOPAQ®. All materials are non toxic, environmental friendly and easy to install. They stay flexible forever and therefore seal the objects in the most optimum way. Cathodic protection current flowing through the casing on to the carrier pipe is stopped. STOPAQ® Casing Filler will protect the casing itself from corroding. Pinholes have occurred in the walls of casings as the cathodic protection current leaves the inner surface of the casing and flows through casing water to the carrier pipe.

Choose below for:
| Technical Data Sheet | Safety Data Sheet |

"Eurospacer" insulating spacers are the last generation of metal free patented products made of synthetic resin. The aim of insulating spacers is positioning, supporting and electrically insulating carrier pipes from casing in the crossings of roads, highways, railways and waterways. It can be used for gas pipelines, oil pipelines, water pipelines and district heating where carrier pipes are made of one of the following materials: polyethylene, PVC, steel, coated steel, cast iron, and plastic reinforced by fiber glass.

FIBERBOND is a UV curing reinforced fiberglass on a roll. Fiberbond cures in sunlight, creating a strong impermeable shield. For protection of insulated pipe, coated pipe, chemical protection, and to reinforce existing pipe and structures.