| Qtn: |
Part: |
| 1 |
T1-2 tapping machine w/ electric 110V drive unit
Drive motor 110V, Back plate w/ spacers for T1A Drive motor, Large chuck wrench for securing
boring bar, GFI electrical protection relay, Packing adaptor housing, Packing assembly , O-rings
standard temperatures, Feed Screw assembly |
| 1 |
1/4" Test valve assembly |
| 1 |
18" D - Boring bar for 3/4" 1 1/4" taps |
| 1 |
24" P - Boring bar for 1 1/2" 2" taps |
| 2 |
1/4" Spare retention pilot drill w/wire for D style boring bar |
| 2 |
3/8" Spare retention pilot drill w/wire for P style boring bar |
| 3 |
Retention wire for 1/4" pilots |
| 3 |
Retention wire for 3/8" pilots |
| 1 |
Owners manual |
| 1 |
Storage box |
| 1 |
1" x 3/4" Bell reducer with close nipple for making 3/4“ taps |
| 1 |
1 1/2" x 1" Bell reducer with close nipple for making 1 1/4 “ taps |
| 1 |
1" Iron Pipe sub adaptor |
| 1 |
2" IP sub adaptor |
| 1 |
11/16" Hi-speed holesaw |
| 1 |
7/8" Hi-speed hole saw |
| 1 |
1 1/8 Hi-speed hole saw |
| 1 |
1-3/8" Hi-speed hole saw |
| 1 |
1-7/8" Hi-speed hole saw |
| Total |
$3,775.00 + Insurance + Handling + Shipping |
Complete Package |
|
| Not necessary to purchase complete kits, Feel free to purchase only what you need for the job. |
| D - boring bar allow small cutters screw directly on. A 1/4" retention style pilot drill is supplied with each D boring bar in this package. P– Each boring bar has a Cutter mandrel and retaining pilot drill. A 3/8" retention style pilot drill is supplied with each P boring bar in this package. |
 |
Click to see picture of a complete package. |
|
